MSR
MSR Series
Magnetic Stripe Card Reader &Writers
Feature
TTL READER
     The MCR Series are undecoded TTL reader. The TTL readers are designed with low power CMOS for TTL interface. The readers are offered, as pictured, with or without cover. Available for single, dual and triple track configurations.

CARD WRITER/READER
     The CardWriter/Reader are compatible with ISO 7811/2, through 5 and ANSI 4.16 1983. Any ISO/ANSI standard track format can be read/written from/to any track location (1,2,3). MSE-630 also reads/writes custom data format and offers selectable writing density (75/210 BPI). It is intended for use with a personal computer via the RS-232 or USB connectivity.

KEYBOARD WEDGE / RS-232 READER
     The compact readers can be attached on the PC keyboard or RS-232 serial interface. The readers have built-in decoder and come with cables to connect to the keyboard and to the PC XT/AT/PS/2 or compatibles. Data sent from the reader emulates keyboard data, so no need to modify hardware and software. The keyboard type, language and output data formats are selectable by dip-switch setting. External power is not required. The RS-232 readers can draw power either from an external source or through the RS-232 port on the system. The readers are available for single, dual and triple track configurations.
TTL READERS MCR Series
Recording Method: Two-frequency coherent phase (F2F)
Compatible with ISO 7810/7811/7812/7813, JIS X6301/6302
Power: Single Track +5VDC ± 5% 2.5mA
Dual Track +5VDC ± 5% 4.7mA
Triple Track +5VDC ± 5% 7.0mA
Output: Vol(Max) = 0.4V, At IOL = 2mA
Vol(Min) = VDD = 0.4V, At VDD = Min
Dimensions(Two Verslons): 100mm(L) x 28mm(H) x 34mm(W) (With Cover)
90mm(L) x 24mm(H) x 22mm(W) (Without Cover)
Wire Length: 210mm(Without Cover)
560mm(With Cover)
Connector: Single Track : 5 Pin or 7 Pin Housing
Dual Track : 7 Pin Housing
Triple Track : 10 Pin Housing
Configurations: Single Track : Track 1,2 or 3, JIS II
JISDual Track : Track 1&2 or 2&3
Triple Track : Track 1&2&3
 
KEYBOARD WEDGE / RS- 232 READER MSR Series
Compatibility: PC AT/XT/PS2 or RS-232 Serial
Power: No External Power Requirements
Output: Keyboard wedge: Emulates Keyboard Output
RS-232: Baud Rate 1200/2400/4800/9600/19200
Dimensions Cables: 158mm(L) x 43mm(W) x 44mm(H)
1.5m From Reader To PC
Connectors: 30mm From Reader To Keyboard
5 Pin On Plug For PC
5 Pin On Socket For Keyboard
9 Pin D-Sub RS-232 (Female) For RS-232
Configurations: Single Track : Track 1,2 or 3, JIS II
Dual Track : Track 1&2 or 2&3
Triple Track : Track 1&2&3
 
CARD WRITER / READER MSE-630 Series
Power: 24V DC 2.5 mA
Current Consumption (Read/Write): 350/600 mA
Dimensions: 212.5mm(L) x 63.5mm(H) x 64mm(W)
Cable: 1.8m RS-232 cable / optional USB adapter cable
Connector: USB or RS-232 Serial
Card Density: Encoding/Decoding : 75 ~ 210 BPI
Configurations: Single Track : Track 1, 2 or 3
Dual Track : Track 1&2 or 2&3
Triple Track : Track 1&2&3
Encoding Energy: 300 - 4000Oersted
Recording Capability: Track 1 : 76 characters
Track 2 : 37 characters
Track 3 : 105 characters
Dual Track : Track 1&2 or 2&3
Triple Track : Track 1&2&3